Automatic Spray Gun MC 1
The MC 1 is a new development for continuous spraying processes, for example on continuous production lines. The material quantity is metered exclusively through the material supply, rather than by a needle in the material nozzle. This means there are no constrictions in the material flow path, preventing the passage from clogging even when the material contains large particles.
Operation
The material is supplied to the spray gun by a pump or pressure vessel and dispensed in metered quantities. The material passage inside the spray gun has no undercuts.
This prevents material build-up and ensures excellent flushability. Materials containing large particles can therefore also be sprayed without clogging. A stainless steel cannula guides the material to the outlet of the material nozzle. Atomisation takes place through the proven Krautzberger air nozzles. The material flow is interrupted by the supply device.
Areas of application
The MC 1 and other needleless spray guns are used to coat rubber profiles on extrusion lines (in-line process). When these profiles are used in the automotive sector, coatings containing large particles are often employed.
Special features
- No needle, preventing clogging even with large particles and/or low flow rates
- Excellent atomisation and spray pattern adjustment, comparable to the M10
- Cannula screwed into the material nozzle; excellent flushability
- Fewer wearing parts, as no seal packing is required
- No intermediate piece, resulting in a very compact spray gun
- Main body with a special hardcoat (Comp-Coat); protects the spray gun and makes cleaning easier
- Long service life
Technical data
W/H/D: 28/60/93 mm
Weight: approx. 225 g
General information
Air and material nozzles currently available in 0.5 mm, 0.8 mm and 1.0 mm.
