Spray guns 
Regulator 
Accessories 
Spray guns 
Coating systems 
Material feed containers 
Lifting devices 
Pumps 
Regulator 
Ventilation technology 
Accessories GA 1 automatic glazing gun
Advantages at a glance
- XLINE nozzle system – anodised in aluminium or stainless steel (VA) available
- Pneumatic membrane closure for high reliability
- Circulation through the spray gun optionally available
- Different adapter variants (with and without circulation, connection in each case G ¼″)
- High air capacity and large cross-sections – ideal for large quantities and high-viscosity media
- Air and material nozzles additionally available in 2.7 mm and 3.0 mm (KG 38 / XF-G)
- Optimal flushability of the spray gun
- No needle and needle pack due to membrane closure → significantly less wear
- Low material nozzle wear as no load is caused by closing the needle
- Low-maintenance and top spray performance
- Robot adapter available
- Compact design, better accessibility of complex geometries
- Fast switching due to low diaphragm stroke
- Quick and easy maintenance
- All connections on the adapter
- Tungsten carbide nozzle available
Technical data
- Dimensions:
- Height: 67 mm
- Height with retaining pin: 73 mm
- Length: 81 mm
- Width without retaining pin: 69 mm
- Width with retaining pin: 119 mm
- Weight:
- Stainless steel design including adapter: approx. 600 g
- Connections:
- Material connection: 1/4 inch
- Control air connection: M5
- Atomiser air: 1/8 inch
- Operating pressures:
- Air connection, max.: 8 bar
- Material connection, max.: 6 bar
- Control air pressure: maximum 8 bar
Note: Diaphragm wear
To ensure reliable sealing of the diaphragm, the control air pressure must be at least 1 bar above the material pressure.
In order to prevent premature wear of the diaphragms and to ensure unimpeded closure of the automatic spray gun, the control air pressure should only be 1.5 bar above the material pressure.
To ensure reliable sealing of the diaphragm, the control air pressure must be at least 1 bar above the material pressure.
In order to prevent premature wear of the diaphragms and to ensure unimpeded closure of the automatic spray gun, the control air pressure should only be 1.5 bar above the material pressure.
Downloads
Product information, GA 1 Glasurautomat
Technical Centre
In our modern technical center, all of the spraying processes we offer, as well as automated processes, can be realistically demonstrated and tested.
To the technical center
To the technical center
Products
Innovative products with state-of-the-art technology: spraying equipment, painting systems, material containers, lifting equipment, pumps, ventilation technology and accessories.
To the products
To the products
Contact
We support you with incomparable Krautzberger quality products, first-class complete systems and the development of individual solutions for your company.
Contact now
Contact now
Spare parts for this product
Here you can find the right spare parts for your Krautzberger product.
Your product request
Request your controller easily and conveniently by email. Fill out the following contact form and we will process your request immediately. We are looking forward to you.
There for you around the clock!
Are you seeking to improve your applications technically, modify the properties of your surfaces functionally or decoratively and optimise your processes? We support you with unrivalled quality Krautzberger products, first-class complete systems, and the development of individual solutions for your company.