XLINE: Spray gun: MC 2

The material is supplied to the spray gun by a pump or pressure vessel and dispensed in metered quantities. The material passage inside the spray gun has no undercuts. This prevents material build-up and ensures excellent flushability. Materials containing large particles can therefore also be sprayed without clogging. A stainless steel cannula guides the material to the outlet of the material nozzle. Atomisation takes place through the Krautzberger XLINE air nozzles. The material flow is interrupted by the supply device. The MC-2 and other needleless spray guns are used to coat rubber profiles on extrusion lines (in-line process). When these profiles are used in the automotive sector, coatings containing large particles are often employed.

Special features:

• No needle, therefore no clogging even for large particles and/or small flow rates
• Very good atomisation and adjustability of the spray pattern analogous to the M18
• Cannula screwed into the material nozzle; very good rinsability
• Less wear parts, as no sealing pack is required
• No intermediate piece required, resulting in a very compact design
• Main body in special hardcoat (Comp-Coat); protects the apparatus and facilitates cleaning
• High service life

The XLINE air nozzle system offers the following advantages:

• Optimization of the air nozzle with the help of numerical flow simulation
• Material change on aluminium anodized, available in stainless steel on request
• Automated 100% control of air nozzles integrated in the manufacturing process
• Functional improvement of air nozzles
• Improved handling of air nozzles
• Very fine atomisation
• Wide homogeneous spraying pattern
• Easy adjustment of the spray pattern
• High transfer efficiency