Customized Service

The experienced staff of our technical team will gladly work with you to develop precisely tailored systems for your particular application needs.

A 10


The high-performance automatic spray gun A 10 essentially consists of two parts: the control section and the fluid head section.

The standard hard-coated head section can be removed from the control section by unscrewing just one screw.

The control system is activated by a 3/2-way valve. When switching on, the compressed air-driven control piston first opens the spray air valve and then ? a short time later ? the material nozzle of the gun. During switch-off, the material nozzle is closed, and then the spray air valve. This control procedure ensures faster working and prevents material nozzle drip.

The practical design of the A 10 makes it extremely repair-friendly and facilitates low maintenance and cleaning. The compact design and the low weight permit use of the A 10 under even the most unfavourable mounting conditions (e.g. in spraying machines and spraying robots).

There are various options for material feed. Guns are available with a range of material connections as well as circulation connections. There is also a wide selection of nozzles and needles of different sizes. The spray gun can of course also be used in combination with our material feed containers, diaphragm pumps and regulators.


Title Document type Languages