Customized Service

The experienced staff of our technical team will gladly work with you to develop precisely tailored systems for your particular application needs.

A 14 HV3


The high-performance automatic spray gun A 14 essentially consists of two parts: the air control section and the fluid head section. The basic design of the gun is the same as that of the A 10 model; the main difference is that the A 14 is equipped with the HVLP (High Volume Low Pressure) nozzle system which ensures low-mist spraying operations under certain conditions. This is an additional further development of the A 12 HV1 spray gun designed to optimise spraying results.

The head section can be removed from the control section by unscrewing just one screw. The control system is activated by a 3/2-way valve. When switching on, the compressed air-driven control piston first opens the spray air valve, after that the material nozzle of the gun. During switch-off, the material nozzle is closed, and then the spray air valve. This control procedure ensures faster working and prevents material nozzle drip.

The practical design of the A 14 makes it extremely repair-friendly and facilitates low maintenance and cleaning. The compact design and the low weight permit use of the A 14 under even the most unfavourable mounting conditions (e.g. in spraying machines and spraying robots).

There are various options for material feed. Guns are available with a range of material connection hose nozzles as well as circulation connections. There is also a wide selection of nozzles and needles of different sizes. The spray gun can of course also be used in combination with our material feed containers, diaphragm pumps and regulators.


Title Document type Languages
Spray gun A 14 User manual
Languages Format Size
PDF 3.53 MB Download
PDF 3.44 MB Download
PDF 3.48 MB Download
PDF 3.51 MB Download
PDF 3.46 MB Download
PDF 3.49 MB Download
PDF 3.52 MB Download

Technical data

Operating pressures / Operating temperature
Max. material pressure1.2 MPa (12 bar)
Max. material temperature100 °C
Max. atomiser air pressure0.8 MPa (8 bar)
Min. control air pressure0.4 MPa (4 bar)
Max. control air pressure0.8 MPa (8 bar)
Max. air temperature50 °C
Material (M)
Atomiser air (Z)
empfohlene kleinste lichte Weite bei max. 4m Leitungslänge4 mm
Control air (St)
Aluminium version750 g
Stainless steel version960 g
Noise emission
Contin. sound pressure leveldepends on nozzle 73-96 dB (A)

Errors and changes reserved. Despite careful editing we cannot guarantee the acuracy of technical information.